TECHNOPLAT CW 507
+/-
Distinguishing marks
 |
CLAMPING, CUTTING AND SEALING SYSTEM
The innovative clamp and cut unit is based on a pneumatic system and delivers high precision and reliable performances by executing each operation step by step. The integrated sealing unit on the LP AS machines is able to seal the film at the end of each wrapping cycle and ensures the absence of any tail. The clamp unit allows the machine to be always ready for the next cycle.
|
 |
CONTROL PANEL
The control panel is equipped with a practical alert system that detects and locates where maintenance/action might be needed.
CONTROL DESCRIPTION
A= STOP
B= START
C= RESET
D= CARRIAGE DESCENT
E= TOP HOLD DOWN UP/DOWN
F= CARRIAGE STOP
PARAMETERS DESCRIPTION
Table rotation speed
Film tensioning
Carriage up/down speed
Film tension upward/downward
Bottom and Top wraps
Film pre-stretch 0% to 300%
Photoeye delay
Sealing time
CYCLE DESCRIPTION
Top sheet cycle (water proof)
Top hold down cycle
4 programmable pre-sets
|
|
|
507 CARRIAGE
Carriage with double pre-stretch system, enabled from the control panel. The carriage is equipped with fixed 250% pre-stretch. When the “Stretch Control” is on, the carriage can automatically switch to variable pre-stretch by activating the electromagnetic clutch on the first pre-stretch roller. “QLS” (quick load system) for fast film loading. |
 |
REMOTE CONTROL KIT
The CW is equipped with a remote control unit
that allows the operator to start the wrapping cycle
without getting of the forklift. This kit is in addition to the lanyar. |
.jpg)
Technical specifications
Layout
Technical specifications
|
TECHNOPLAT CW 507-Automatic turntable with clamp-cut and sealing unit |
||
|
Carriage |
Variable power pre-stretch with force to load electronic control |
|
|
Machine Characteristics
|
||
|
Plate diameter |
70"
|
|
|
Turntable rotation speed: |
4-15 rpm
|
|
|
Forklifting
|
Front and Rear |
|
|
Power supply voltage |
120 Volt 1 Ph/60 Hz |
|
|
Installed power |
3.1 HP |
|
|
Pre-stretch ratio fixed: |
250%
|
|
|
Phase stopping |
STD |
|
|
Soft start |
STD
|
|
|
Remotely control cycle start |
STD
|
|
|
Automatic clamp cut and sealing unit
|
STD
|
|
|
Characteristics of the product to be wrapped |
||
|
Maximum dimensions (LxW) |
48 x 48" |
|
|
Maximum useful height: |
94" |
|
|
Maximum load weight: |
4400 lbs |
|
|
Film roll characteristics
|
||
|
Max. external diameter (D): |
12" |
|
|
Film roll height (h): |
20" (30" option)
|
|
|
Film thickness: |
70 ÷ 140 gauge |
|
|
Internal diameter (d): |
3" |
|
|
Max. weight: |
44 lbs |
|
P.I. 02691590406
Websolute