Rotoplat 507 PFS
+/-
Distinguishing marks
| TURNTABLE The new turntable base has front and rear forklift portability to facilitate operations. The plate is spinning on heavy duty casters with sealed bearings. A chain and sprocket system ensures consistent and reliable turntable performances during rotation.The diamond pattern on the plate ensures better grip for any load avoiding slippage during the wrapping cycle.
|
| MAST The mast is made of cold folded steel and has a tubolar inner structure in order to ensure maximum rigidity and resistance to any torsion or strain. An heavy duty drive chain moves the film carriage upward and downward for a constant and accurate control of the wrapping process. The anti-fall device in case of emergency assures the maximum safety. |
 | The control panel has been upgraded and now it features a STOP CYCLE push button. CONTROL PANEL FUNCTIONS Turntable rotation speed Pre-stretch ratio Upward/Downward film carriage speed Force to load control upward and downward Bottom and Top wraps Photoeye sensing delay WRAPPING CYCLES AND CUSTOM PROGRAMS Top sheet cycle (water proof) Top hold down cycle Reinforcement wraps 4 programmable pre-sets |
| HOME POSITION The load always stops in the same position that was placed in before the wrapping. This greatly improves times and costs of the process. Plate’s smooth start and stop steps are controlled by VFD that provides consistently the same positioning of the load before and after the wrapping cycle.The gear and worm system makes it possible to keep the phase of the turntable even while positioning the load on the plate. |
| PFS FILM CARRIAGE Film carriage with powered frictioned pre-stretch system. Pre-stretch ratio adjustable on control panel from 0% up to 300% by electromagnetic brake. Force to load controlled by patented electronic device and adjustable from panel board. |
.jpg)
Technical specifications
| ROTOPLAT 507 PFS - Turntable for packaging with stretch film | |||
| Carriage | PFS: Variable Power pre-stretch with force to load electronic control | ||
| Machine Characteristics | |||
| Plate diameter | 65" | ||
| Turntable rotation speed: | 4-15 rpm | ||
| Forklifting (507 PFS) | Front and Rear | ||
| Power supply voltage | 120 Volt 1 Ph/60 Hz | ||
| Installed power | 1.3 HP | ||
| Phase stopping | STD | ||
| Pre-stretch ratio | 0-300% | ||
| Soft start | STD | ||
| Characteristics of the product to be wrapped | |||
| Maximum dimensions (LxW) | 48" x 48" | ||
| Maximum useful height: | 94" | ||
| Maximum load weight (507 PFS): | 4400 lbs | ||
| Film roll characteristics | |||
| Max. external diameter (D): | 12" | ||
| Film spool height (h): | 20" (optional 30") | ||
| Film thickness: | 70 ÷ 140 gauge | ||
| Internal diameter (d): | 3" | ||
| Max. weight: | 44 lbs | ||
Layout
P.I. 02691590406
Websolute